New Equipment Showrooms – Clark – WAREHOUSE EQUIPMENT

 

New Equipment Showrooms – Clark

IC-PNEUMATIC

IC-CUSHION

ELECTRIC

NARROW ISLE

WAREHOUSE



WAREHOUSE EQUIPMENT


PWX30/40 HWX30/40

WALKIE-PALLET-STACKER, Electric 24 Volt

Features & Options:

PWX/HWX...The foundation of the CLARK Powrworker® line continues to set the standard for rugged dependability since its introduction as the industry's first hydraulically powered low-lift in 1920.

Weight: 6000 / 8000 lbs (2720 / 3630 kg)

Manufacturing & Warehousing


WPX45

WALKIE-PALLET-STACKER, Electric 24 Volt

FEATURES

ERGONOMIC STEER/CONTROL HANDLE

Solid steel tubing - Solid steel tubing arm and handle designed to outlast cast aluminum or plastic designs

Operator Control - Handle offers travel, lift and lower functions all accessible without the operator having to lift a hand from the handle

Angle grips - Designed to allow easy operation with either hand

Wrap around steel guard - Reversing switch, thumb control, and horn are standard

Minimum steering effort - Low mounted tiller arm offers excellent operator comfort

Gas assisted spring handle - Gently returns handle to vertical position

Crawl speed function - With the steer handle at 5° back-tilt from vertical position operator has ease of use in tight areas

3000 / 3500 / 4000 / 4500 lbs (1350 / 1600 / 1800 / 2000 kg)

Grocery, Distribution, Manufacturing and Warehousing


WP30

WALKIE-PALLET-STACKER, Electric 24 Volt

Motor

DRIVE MOTOR - 24-Volt permanent magnet DC drive motor increases efficiency and duty cycle

BRAKES - Parking brake is automatically applied when truck stops and handle is released

HYDRAULIC SYSTEM - Lift cylinder has durable, chrome-plated lift rod provides smooth lifting and lowering

STANDARD BATTERY - 70Ah (AGM) Absorbed Glass Mat battery pack for extended run times - up to 4.5 hours

ON-BOARD CHARGER - Standard 110V three-prong outlet plug for convenient charging

STANDARD EQUIPMENT - Quick disconnect EPD power cut-off, hour meter, and battery discharge indicator all come standard

3000 lbs (1360 kg)

Light Manufacturing, Grocery & Delivery Trucks


SSX 12/16/18

WALKIE-PALLET-STACKER, Electric 24 Volt

SSX...The CLARK Powrworker® line continues to set the standard for rugged dependability since its introduction as the industry’s first hydraulically powered low-lift in 1920.

2500/3500/4000 (1200/1600/1800)

Manufacturing and Warehouse


WSTX22

WALKIE-PALLET-STACKER, Electric 24 Volt

Features

  • HYDRAULICS  Lift cylinder is hard chrome. Pump unit includes motor, gear pump, and solenoid. Pressure compensated lowering valves regulates lowering speeds.
  • ELECTRICAL AC travel controller and AC drive motor provides high torque throughout the entire drive range. Regenerative braking and brushless design drastically reduces maintenance. Travel speed remains constant relative to throttle position regardless of the load on truck. Automatic resetting circuit breaker and one-piece micro switch design complete the system.
  • BRAKES Electromagnetic brake is mounted on motor armature shaft multiplying the braking power through the transmission. Brake is applied when control arm is in the vertical or horizontal handle position. Travel speed is reduced when forks are above 12” fork height. Neutral braking resists roll back on ramps
  • CONTROLS  Travel, lift, lower and tilt functions are located in the ergonomic operator handle, designed to allow operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.  Angle grips are designed to allow easy operation with either hand. Low mounted tiller arm offers excellent operator comfort and minimum steering effort. 
  • TRANSMISSION  Vertically mounted drive motor is direct mounted to gear housing. Oil bathed ZF GK10 hypoid bevel gear drive-train transfers power to axle. State of the art optimized gear technology supplies advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance.
  • FRAME AND MAST Bolt-on high visibility I-beam construction, lift cylinders are positioned in outer I-beam for good operator visibility through mast. Dual lifting chains. Class two ITA fork carriage with 36” tall load back rest
  • ACCESSIBLITY Removal of two-piece power head cover exposes major components for inspection and maintenance. Drive wheel is removed with one nut.
  • BEARINGS DRIVE WHEEL-Tapered roller bearings sealed in oil bath LOAD WHEELS-Sealed ball bearings

2200 lbs (998 kg)

Manufacturing and Warehouse


WS22M

WALKIE-PALLET-STACKER, 24V Electric

Features

  • HYDRAULICS  Lift cylinder is hard chrome. Permanent magnet pump motor and chrome plated lift cylinder provides smooth lifting and lowering. Pump unit includes DC motor, solenoid, and gear pump.
  • DRIVE 24-Volt permanent magnet DC drive motor with rare earth neodymium magnets in-creases efficiency and duty cycle.
  • ELECTRICAL Travel control provides smooth step less travel. Quick disconnect power cut off and battery discharge indicator are standard equipment.
  • BRAKES Electronic neutral braking function provides smooth and safe control. Electro-magnetic disc brake provides safe and secure stops under all conditions.
  • TILLER ARM CONTROLS Offset steering arm provides excellent line of sight for operators. Right angle stacking in aisles as narrow as 60”. Travel, lift, and lower functions are located in the ergonomic operator handle. All operator controls are accessible without having to lift the hand from the handle. Angle grips are designed to allow easy operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard. Low mounted tiller arm offers excellent operator comfort and minimum steering effort.
  • FRAME AND MAST All steel construction welded rigid steel chassis for added durability. Adjustable forks on pin style carriage. Forks are adjustable from 8” ID to 27.5” OD. Standard fork is 42” long x 3.5” wide x 1.25” thick Non-telescoping mono mast with single lifting chain, adjustable mast rollers. Chrome plated lift cylinder provides smooth lift/lower operation and long life. Three-inch-wide adjustable straddle legs for ease of operation in racked aisles. Four position adjustment allows for preset outrigger dimensions to fit various sized pallets. Straddle leg inside dimension (ID) can be set at 38” to 50” in 4” increments. Fully enclosed wheel guard and flush mounted axles prevent wheel and axle damage during normal use.
  • SERVICEABILITY Removable one-piece power head cover allows for easy maintenance.
  • OPTIONAL BATTERY UPGRADE 85AH maintenance-free batteries   available

2200 lbs (998 kg)

Manufacturing and Warehouse

WSTX33

WALKIE-PALLET-STACKER, 24V Electric

Features

HYDRAULICS  Lift cylinder is hard chrome. Pump unit includes motor, gear pump, and solenoid. Pressure compensated lowering valves regulates lowering speeds.  

ELECTRICAL Infinelty variable travel controller and AC drive motor  provides high torque through-out the entire drive range. Regenerative braking and brushless  design drastically reduces maintenance.  Travel speed remains constant relative to throttle position regardless of the load on truck. Automatic resetting circuit breaker and one piece micro switch design complete the system.

BRAKES Electromagnetic brake is mounted on motor armature shaft multiplying the braking power through the ZF GK20 transmission.  Brake is applied when control arm is in the vertical or horizontal handle position. Travel speed is reduced when forks are above 12” fork height. Neutral braking resists roll back on ramps.

CONTROLS Travel, lift, lower and tilt  functions are located in the ergonomic operator handle, designed to allow operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.

TRANSMISSION Vertically mounted drive motor is direct mounted to gear housing. Oil bathed ZF GK10 hypoid  bevel  gear drive-train  transfers power  to  axle.  State  of  the  art  optimized   gear  technology  supplies  advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance.

FRAME AND MAST Bolt-on high visibility I-beam construction, lift cylinders are positioned in outer I-beam. Dual lifting chains. Class two ITA fork carriage with 36” tall load back rest.

BEARINGS DRIVE WHEEL-Tapered roller bearings sealed in oil bath LOAD WHEELS-Sealed ball bearings

ACCESSIBLITY Removal of two piece power head cover exposes major components for inspection and maintenance. Drive wheel is removed with one nut.

STANDARD EQUIPMENT

Regenerative Neutral Braking

Gas Assist Spring Handle

Low Battery Lift Interrupt

Hour Meter BDI Combo Gauge

Key Switch

35” Tall Load Backrest

3300 lbs. (1497 kgs.)

Manufacturing and Warehouse

WSRX30

WALKIE-PALLET-STACKER, 24V Electric

Features

HYDRAULICS  Lift cylinder has hard chrome plated rods. Pump unit including motor, solenoid, gear pump, and pressure compensated lowering valve are mounted high in the power compartment for ease of service.  

ELECTRICAL 24-Volt   ZAPI    Combi-ACx, travel control with matching drive motor provide high performance throughout the entire speed  range.  Travel  speed remains constant  relative  to  throttle  position regardless of load.  Separately  fused power control circuits, quick disconnect EPD power cut off, and hour meter /battery discharge indicator combination gauge complete the  system. Power configurations and diagnostic features are displayed with a ZAPI handheld console.

BRAKES Regenerative electromagnetic brake is mounted on the motor armature shaft multiplying the braking power through the transmission. Brake is applied when the control arm is in the vertical or horizontal handle position.  Travel speed is reduced when forks are above 12” fork height. Neutral braking resists roll back on ramps

CONTROLS Travel, lift, and lower functions are located in the ergonomic operator handle. All operator controls are accessible without having to lift the hand from the handle. Angle grips are designed to allow easy operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.  Top mounted tiller arm offers excellent operator comfort and minimum steering effort. Gas assisted spring gently returns handle to vertical position.
TRANSMISSION Vertically mounted drive motor is direct mounted to gear housing. Oil bathed ZF GK10 hypoid bevel gear drive train with tapered roller bearings transfers power to axle. State of the art optimized gear tech-nology supplies advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance.

MAST & PANTOGRAPH I-beam mast with dual lifting chains. Pantograph stroke extends the fork carraige beyond the units straddle legs, with integral tilt and sideshift.

STRADDLE LEGS & FORKS Fixed straddle leg inside dimensions (ID) available at 34” or 42” resulting in a 42” or 50” outside dimension (OD). Class 2 ITA fork carriage with 36” tall load back rest and 42” Forks spacing is adjustable.

 

3000 lbs. (1361 kgs.)

Warehouse, Manufacturing, Narrow Aisle

WPL25

24V Electric Lithium Ion Battery

Features

HYDRAULICS

Permanent magnet DC pump motor and chrome plated cylinder provide for smooth and efficient lifting.

ELECTRICAL

Water resistant connectors and shrouded wiring harness supply power reliably to components. System includes a key switch; emergency power disconnects and on-board dock for Easy Exchange Battery.

BRAKES

Electromechanical brake provides good stopping power when handle is upright or lowered beyond the operating range.

CONTROLS 

Travel, lift, and lower functions are located in the ergonomic operator handle. All operator controls are accessible without having to lift one’s hand from the loop handle. The control head is designed to allow easy operation with either hand and includes a belly button reversing switch, dual butterfly travel controls, horn, battery discharge indicator and manual lowering control for quick and efficient operation. The low mounted tiller arm offers excellent operator comfort and minimum steering effort.

DUTY CYCLE 

Revolutionary Easy Exchange Battery delivers up to 3 hours of operation and can be fully charged within 2.5 hours. Optional extra batteries can be purchased to extend run time or to serve as a reliable back-up.

FORKS 27” OAW x 45.25” OAL

Designed for use with standard 48” pallets and other common skids and containers. Forks can achieve a maximum elevation of over 7.5” and are shaped at the load wheel housings for pallet entry and exit without need for wearable rollers.

SERVICEABILITY

Removable covers and modular design of components provides for easy maintenance with simple hand tools. Two-piece drive wheel reduces

complexity of tire changes.

 

2500 (1130)

Warehouse, Manufacturing, Narrow Aisle